Pallas

Plafonden Pallas is available in several variants with 3000K and 4000K and with different types of control and sensors. The luminaire provides a pleasant backlight and is mounted on walls or ceilings in corridors, stairwells, storage rooms, toilets, basements, changing rooms or other public areas.
The cover and body are IP44 and made of injection molded opal polycarbonate (PC) with properties such as impact resistant (IK10) and high fire rating (IEC60695; burning behavior 1 mm = V-2, GWFI=800 gr C).
Pallas is double insulated and requires no protective earth.

Models of Pallas:

ON/OFF, with adjustable power in 4 steps.

RS has adjustable power in 4 steps and is equipped with a motion sensor that turns the luminaire on in case of presence and turns the luminaire off if no presence is registered during the set delay time.
It is also possible to let an RS luminaire operate luminaires without RS (slave luminaires). A maximum of five slave luminaires with electronic actuators per RS luminaire. If more slave luminaires are desired, or if older luminaires are to be enslaved, contact customer support and they will help find a solution.

NÖD has a built-in emergency light (1 hour) that is activated in the event of a power failure. The luminaire provides 100 lumens in emergency mode.

BTDA enables wireless control and grouping of luminaires using Bluetooth and the Exaktor Koolmesh app for iOS. The luminaires communicate with each other through a mesh network that relays information via the other luminaires.
This provides stable signal strength and is also suitable for difficult environments for radio signals, such as brick and concrete building materials.

MULTISENSOR has a built-in motion sensor with both corridor function and daylight sensor. The sensor has several functions that can be easily adjusted, such as sensitivity, holding time and basic light. Pallas Multisensor cannot be connected to slave luminaires.

All models of Pallas are manufactured in Värnamo.