Moln BAS

Moln BAS is a thin light panel with opal diffuser available in three different sizes (600×600, 600×300 and 1200x300mm) and is suitable for general lighting in most environments.
The luminaire has a discreet frame in white lacquered aluminum that is mounted without tools in the ceiling with a visible support profile, the minimum recess depth when mounted from below is 50mm.
Moln BAS can be suspended at any height with accessories (E7013277) or mounted on the ceiling using accessories (E7013700, E7014513).
To change the appearance of the luminaire, the luminaire can be combined with a circular cover plate available as an accessory (E7910385, E7910178).
Moln BAS has protection class IP20 above the ceiling and protection class IP44 below the ceiling; when surface mounted in a frame, the entire luminaire is classified as IP20.

The luminaire is available with different controls; on/off, DALI or with RS, with 3000K or 4000K and in variants with high luminous flux (HO).
On/off is supplied with a free-standing, strain-relieved control gear and a 3m cord set with an ungrounded euro plug.
DALI is delivered with a freestanding pull-loaded DALI driver and a 3 meter 5-wire cable. For impulse control, all drivers must be of the same make.
RS has an actuator with a built-in motion sensor that provides 100% luminous flux in the event of presence and then reduces to a basic safety light of 10% after a set holding time (5 minutes).
Supplied with customized control unit and cord. Quick connection between driver and light panel.

On request, Moln BAS is available with another luminous flux or emergency light function.